Condor Cross Draw Vest
Condor Cross Draw Vest
Condor Cross Draw Vest
Condor Cross Draw Vest

Condor Cross Draw Vest

MSRP: $74.95
The Condor Cross Draw Vest is built to be sturdy and customizable both in fit and for use with additional, modular attachments. The vest features a total of 6 magazine pouches that are all easily accessible, 3 for rifle magazines and 3 for pistol magazines. The cross draw pistol holster is cable of carrying most medium-framed pistols.

The vest is mounted on tough nylon mesh material which aids in ventilation and the rear, double ply mesh allows for the addition of a hydration bladder. A built in carrying handle allows for easy transport when not wearing the vest. Heavy duty webbing in the rear allows for modular attachment of other pouches.


  • Shoulder adjustment via hook and loop strips
  • 2 metal D-rings for the attachment of carabiners or other gear
  • Vest zips up in front and can be secured with included pistol belt
  • Interior of vest has two zip-up document pockets left and right
  • Left and right sides can be adjusted for width via drawstrings
  • Size: M/L - Up to 44" (chest size), XL/XXL - Up to 52" (chest size)
  • Reviews
    Review Summary
    2 Reviews
    0% (0)
    0% (0)
    100% (2)
    0% (0)
    0% (0)
    0% Recommend this product (0 of 2 responses)
    By Craig
    April 8, 2013
    Good for the money
    It works well, comfortable, cleans easily, the pistol holder is not tied down well and for now I have modified the top part of it to keep it tight to vest. I may just pull it off and move the EMS pouch to that position and stay with a leg rig for the pistol. It holds a Glock 23 fine otherwise. Good mag placement for rightys, but leftys keep shopping. You will have to spend well over $100.00 to get the next best thing.
    By GS
    East Coast
    September 5, 2012
    Overall Decent Product
    This is one of the more comfortable vests that I have worn and allows quick and easy adjustments. I also like the fact that it breathes much more because of the mesh webbing. My only complaint and it's the most important to me is the "Cross-draw Holster". The Glock19 fits snug in the holster yet the strap does not adjust enough to make for a tighter fit. But the biggest problem with the holster is not being able to stay secure to the vest with a load 9mm pistol. The snaps do not stay locked while engaging in fast paced running nor does the holster stay close to the vest due to the weight of the firearm. I had to make my own personal modifications. I would recommend this product, but be prepared to make some modifications to the vest for a better fit.
    21 Questions & 22 Answers
    Lawrence Brown
    from Michigan asked:
    November 29, 2016
    Is it Bulletproof
    1 Answers
    Great question, I pulled one from the warehouse to look at. This is just a vest, there is a pouch in the back where you could put a plate however it does not appear to be built for that purpose particularly with the zippered front. I hope this helps!
    Customer Service
    on November 30, 2016

    from Florida asked:
    November 19, 2016
    Would the holster hold an KWA M9 ptp? I'm an airsofter.
    1 Answers
    This does look to be a good fit for the holster.
    Customer Service
    on November 21, 2016

    from Colorado asked:
    September 11, 2016
    Will it accept ak47 magazines?
    1 Answers
    It should but maybe tough to have the flap close over them in the pouch.
    Customer Service
    on September 12, 2016

    from Columbus, ohio asked:
    January 25, 2016
    Where is the product made?
    1 Answers
    This vest is made in China.
    Customer Service
    on February 8, 2016

    from North Carolina asked:
    January 18, 2016
    Is the holster removable, and the vest ready for other MOLLE gear such as extra mag carriers?
    1 Answers
    Yes, the holster is removable and you can attach other MOLLE pouches in place of the holster if you'd like.
    Customer Service
    on January 22, 2016

    from Oregon asked:
    January 5, 2016
    Can you get the medium size? I have a xl-xxl and it is too long. I have used up all the adjustment in the shoulders and still too long. I'm 5'7" 43" chest. Thanks.
    1 Answers
    The one's that are not marked with a size are the Medium-Large sized ones.
    Customer Service
    on February 2, 2016

    from Perry Georgia asked:
    December 23, 2015
    Can it be ordered for left hand shooters?
    1 Answers
    At this time Condor doesn't make this for left hand draw.
    Customer Service
    on December 29, 2015

    from Charlotte nc asked:
    December 19, 2015
    Can you get for a lefty.
    1 Answers
    Unfortunately we don't show that Condor makes one for lefties at this time.
    Customer Service
    on January 7, 2016

    from Peyton, CO asked:
    November 24, 2015
    Is there a hydration sleeve integrated to the back, or would an aftermarket MOLLE hydraton pouch be required?
    1 Answers
    Yes, there is an integrated pouch for a hydration system in the back. It's sort of hidden though and you have to access it from the inside of the vest. I almost said know until i saw the velcro and realized it was an additional compartment.
    Customer Service
    on December 9, 2015

    from Las Vegas asked:
    August 10, 2015
    Will the cross draw holster hold a X26 taser?
    1 Answers
    I don't have that specific taser to test that holster. But these holsters are typically built for a handguns and they taper at the bottom of the holster in order to retain the weapon better. I do not believe that this will work for an X-26, it would be too large.
    Customer Service
    on August 11, 2015

    Manuel Reis
    from Afghanistan asked:
    April 19, 2015
    Does a 7,62 mm magazine fit into the mag pouche?
    1 Answers
    we do apologize but no we do not show that this would fit your magazines as these were designed for 5.56 style magazines.
    Customer Service
    on April 20, 2015

    from Cleveland Ohio asked:
    April 12, 2015
    Will a co2 gbb 1911 pistol and the mags fit in the holster
    1 Answers
    as long as your weapon is a standard clone and not a different size from a standard 1911 then it will fit just fine.
    Customer Service
    on April 14, 2015

    from Birmingham,al asked:
    October 7, 2014
    Does the hold level lll plates
    1 Answers
    No this item would not be able to accommodate plates.
    Customer Service
    on October 7, 2014

    from Florida asked:
    January 10, 2014
    is the belt included with the vest package
    1 Answers
    yes the belt is included with the vest.
    Customer Service
    on January 15, 2014

    from Maryland asked:
    September 23, 2013
    will this vest adjust enough to fit over top of my second chance vest for duty?
    1 Answers
    This vest should be able to adjust enough to accommodate your second chance vest, but it will depend on how much extra space you have based on your body size.
    Customer Service
    on September 24, 2013

    from Ft Worth, Texas asked:
    September 17, 2013
    I'm 5'7" , 175 pounds. Does the vest have enough adjustment in length so that I can get the belt to ride on the hips where it will help carry the weight? From the top of my shoulder to the top of my belt is about 18" (yes, I'm a hobbit). Thanks
    1 Answers
    For this Condor Vest, from the top of the shoulder to the top of the belt is about 20" long.
    Customer Service
    on September 18, 2013

    August 14, 2013
    2 Answers
    We do not know if the 30 round Mini 14 magazines will fit in the rifle magazine pouches, but we have heard that 20 round magazines will fit. Also, the Beretta magazines will fit in the pistol mag pouches.
    on August 14, 2013
    The Tapco 2nd gen Ruger mini-14, 30 round magazines fit just fine. (As do the metal factory mags)
    on May 20, 2014
    from Mooresville, NC

    March 1, 2013
    Can the mag pouches be removed?
    1 Answers
    The mag pouches on the belt can be removed, but the pouches on the vest itself are sewn on and cannot be removed.
    on March 1, 2013

    February 4, 2013
    Behind the included holster are those MOLLE straps. If so could the a Blackhawk SERPA holster with MOLLE attachment be attached?
    1 Answers
    Yes, there is MOLLE behind the holster. The holster is removable and a Blackhawk Serpa Holser with the MOLLE attachment is able to mount on this vest.
    on February 4, 2013

    January 2, 2013
    Does this vest come in a Left Handed Draw?
    1 Answers
    Condor does not make this vest for left handed draw.
    on January 2, 2013

    October 28, 2012
    Would the holster hold a glock 22
    1 Answers
    It should carry it just fine.
    on October 28, 2012

    You May Also Like