Uncle Mike's Body Armor Holster

Uncle Mike's Body Armor Holster

SKU #: UncleM-BodyHolster
MSRP: $10.95
$7.99
Description
Don't see a holster for your firearm listed? Please use our Holster Finder for a list of great options that are compatible with your gun!

A slim, four-layer laminate holster designed for deep concealment. Holster is covered with a soft, suede-like outer shell, that can be comfortably worn directly against the skin. hook and loop-covered belt loop on both sides makes holster ambidextrous and accommodates either body armor side adjustment straps or Belly Band straps. Laminated construction includes a layer of waterproof closed-cell foam padding that forms a moisture barrier against perspiration. Light color minimizes show through.

Smooth nylon lining for unencumbered draw. Removable hook and loop overstrap accommodates a wide range of gun frame and hammer combinations. Flat profile allows holster to lie alongside trailing edge of vest or between front and back panels. Belt loops on both sides permit strapping holster on right or left side of body armor; straps also can be run on inside or outside of holster. Ambidextrous design allows right or left hand use, and either strong side or cross draw positioning.
Dimensions:

  • 5 Inches deep plus the retaining strap.
  • 3 Inches thick
  • Reviews
    4.7
    3 Reviews
    5
    67% (2)
    4
    33% (1)
    3
    0% (0)
    2
    0% (0)
    1
    0% (0)
    100% Recommend this product (3 of 3 responses)
    By GG
    Albany, Ga
    July 14, 2016
    awesome
    Works great. I wear it with a G27. Fits great. No complaints.
    By Josh
    Alabama
    January 5, 2014
    Practical and comfortable
    I use this to carry my backup weapon (S&W bodyguard .380) on my vest, it works perfectly. It is comfortable, secure and low profile. I highly recommend.
    By Joe
    Connecticut
    October 31, 2013
    Take two!
    Great simple holster worked so well with a 380 I got one for my Glock 27. Holds it tight and secure, would be nice if it was an adjustable thumb break. For the price it's well worth it!
    ProsPrice Simple design
    ConsThumb break.... It could use one
    Q&A
    14 Questions & 21 Answers
    Aaron
    from Baraboo, WI asked:
    April 7, 2017
    Which would fit my Springfield XDS9mm, 3.3inch barrel? I want to make sure it seats well and not sticking out of the holster.
    1 Answers
    I apologize for the delayed response, you would need the 87454 version.
    Customer Service
    on April 28, 2017

    RV
    from Washington asked:
    February 20, 2017
    Will this fit a S&W .38 special +P (airweight)?
    1 Answers
    I’m not sure about that handgun but the internal dimensions of the holster are 5 inches deep and 3 inches thick.
    Customer Service
    on February 22, 2017

    Matt
    from Glenwood Springs, Colorado asked:
    December 11, 2016
    Will the holster fit a S&W M&P shield 9mm and what size holster is recommended?
    3 Answers
    It fits my Shield.
    Terry
    on December 12, 2016
    from Senatobia, MS
    I bought the holster for my S&W shield .40 caliber. It fits just fine. You shouldn't have a problem at all
    Danny
    on December 12, 2016
    from Collinsville, IL
    Yes it will. Get the model #87454, it fits sub compacts from 9mm to 40 cal.
    michael
    on December 17, 2016
    from Ohio

    John
    from PA asked:
    October 25, 2016
    How do you use the straps for inside the pants consealment?
    3 Answers
    It's a body armor holster. That's the purpose of the straps. I can't see using it as an inside the pants holster and it being secure. Inside the pants holster has a different setup.
    Michael
    on October 25, 2016
    from Ohio
    I have only used this item attached to my ballistic carrier. I don't believe it was designed to be an IWB holster. If you figure something out let me know.
    mark
    on October 25, 2016
    from Dunmore, PA
    You don't. This holster is made for a go bag or vest pocket.
    Jason
    on October 25, 2016
    from Las Vegas, NV

    Wolfman
    from Knoxville, TN asked:
    June 23, 2016
    Will this fit the Beretta .380 Pico BU with lasermax?
    1 Answers
    Uncle Mike's doesn't have a particular size chart for this holster as its meant to hold a wide range of guns. Unfortunately they don't show that it will fit weapons with lasers or lights attached. We cannot give a 100% guarantee that it will fit correctly.
    Customer Service
    on June 24, 2016

    Bob
    from TX asked:
    February 12, 2016
    will this fit a Ruger sr9
    2 Answers
    Unfortunately Uncle Mike's doesn't show a fit for your weapon and this holster.
    Customer Service
    on February 24, 2016
    Might be a little small for the SR9. It might be enough to cover the trigger, it snugly fits a 26
    Bobby
    on February 24, 2016
    from Florida

    Mark
    from NEPA asked:
    December 21, 2015
    Will this accommodate a Ruger LCP?
    1 Answers
    Yes, this holster will fit a Ruger LCP.
    Customer Service
    on December 30, 2015

    Frank
    from Delaware asked:
    October 1, 2015
    I have a SCCY CPX-1 with a TR10 laser. Will this holster fit?
    1 Answers
    Uncle Mike's doesn't have your weapon listed as one that would fit this holster. But I think that if you were to select the third Option #87454, than that should fit. Your barrel length is 3.1" and this accommodates up to 3.75" - I can't confirm whether that would actually work though with the laser, it may be too big.
    Customer Service
    on October 1, 2015

    matt
    from tn asked:
    May 16, 2015
    Is there one that will fit a glock 42?
    1 Answers
    It will be the one that fits subcompacts up to a 3.75in barrel.
    Customer Service
    on May 18, 2015

    Jackie
    from Austin, TX asked:
    January 12, 2015
    I have a ruger LCR 357. Is there a holster for this revolver?
    1 Answers
    we do apologize but under this holster we do not show that this one will fit your weapon. please follow the link below as this will help you to find a holster for your revolver. http://lapolicegear.ecomm-search.com/Holster-Finder
    Customer Service
    on January 12, 2015

    jim
    from atlanta, ga. asked:
    November 7, 2014
    will a g42 fit in this holster
    1 Answers
    under the drop down menu you would want to select the best fitment option as this is a more universal style holster. the subcompact model should fit your weapon we would think.
    Customer Service
    on November 10, 2014

    Chad
    from California asked:
    August 1, 2014
    Will this holster fit a Colt Defender (45 ACP)?
    1 Answers
    unfortunately no we do not think this holster will fit due to the size of your weapon.
    Customer Service
    on August 4, 2014

    Chris
    from Chicago, IL asked:
    November 30, 2013
    Will this fit a glock 30s?
    3 Answers
    Yes, it should fit a G30. I use this holster for a G27 and since the G30 is a tad bigger it will be a snug fit.
    Paul
    on November 30, 2013
    from Bay Area, California
    I use it for my Glock 27, it's about as big as it will hold, my 23 doesn't seat as well. The bottom is sewn closed so it tapers in to the seam. If you are able to, I would order a couple and try a slight modification job. I wear mine everyday I'm on the road and love it. For the price why not see if you can make it work. If you have any questions let me know. Joe
    Joe
    on November 30, 2013
    from CT
    It fit my G27 just fine
    Grant
    on December 1, 2013
    from Port St Lucie, FL

    Vic
    February 20, 2013
    Will this fit my Baretta px4 storm compact?
    1 Answers
    Yes, this Uncle Mike's Holster will fit a Beretta Px4 Storm Compact. Choose option 87454 which will fit 9mm/.40 auto's with barrel lengths up to 3.75".
    on February 20, 2013

    You May Also Like