Tactical Assault Gear Rampage Plate Carrier CLOSEOUT
Tactical Assault Gear Rampage Plate Carrier CLOSEOUT

Tactical Assault Gear Rampage Plate Carrier CLOSEOUT

SKU #: TAG-Rampage
MSRP: $200.00
Out of Stock

This item is currently out of stock.
Please use the search bar above to find similar products.


TAG's Rampage is a split front (patent pending) plate carrier that will accommodate any size trauma plate, sizes small through large long. The carrier has removable cummerbunds with removable side plate pouches. The front, back, and cummerbunds are cut to fit after market level 3A soft armor. You can now have full front, back and side armor protection in a low profile user friendly package. The split in the front allows you to set up your gear and quickly get in and out of the carrier via side entry. It is also fully covered in P.A.L.S. webbing, with adjustable shoulder straps and a heavy duty drag handle. This piece of gear is overbuilt to withstand whatever you throw at it and is backed by a lifetime warranty.

The sizing is based on plate size overall not body size.


  • S/M - Fits Most- Adjustable Cummerbund- Sized For 10x12 Level 3 and 4 Plates
  • L/XL - Fits Most- Adjustable Cummerbund -Sized For 11x14 Level 3 and 4 Plates

    Made in the USA
  • Reviews
    2 Reviews
    50% (1)
    50% (1)
    0% (0)
    0% (0)
    0% (0)
    100% Recommend this product (2 of 2 responses)
    By Frank
    Bel Air, MD
    April 30, 2016
    Rampage Plate Carrier
    A quality made plate carrier made in the USA by TAG! However, I think TAG is phasing them out because they are hard to find.
    ProsA quality well made carrier for soft body armor and light weight plates made of PE. I use level 3a armor in-conjunction with PE level 3+ plates. A perfect set up for less weight and speed! Shoulder straps are low profile and do not interfere with rifle slings and backpack straps! With that being said, the vest straps are not padded enough for heavy ceramic or even heavier steel plates. Nothing that a good set of aftermarket shoulder pads wouldn't cure! I have the shell-back carrier made by TAG and now the Rampage carrier and both are excellent plate carriers. Right now I prefer the Rampage because of it overall low profile shoulder straps.
    ConsCons - They are hard to find and that is the reason for the 4 star rating - Thank you La Police Gear!
    By Jim
    Accokeek, MD
    May 8, 2014
    Excellent plate carrier
    I bought this plate carrier to use in a carbine class. I mounted mag carriers, admin pounch, EMT pounch, dump pouch, camelbak, and optic pouch to it. Very comfortable, didn't interfere with anything, and carried what I needed carried. Haven't run it with plates yet. Would highly recommend this to others.
    ProsMany, but include: - Low profile shoulder straps - while they aren't padded which may affect comfort when fully loaded, they also do not interfere with shouldering a rifle and do not get hung up on slings. This was a big decision factor for me. - Relatively thin and fitted - allowed me to run a pistol and mag on my belt rather than needing a drop leg platform. - Removable side armor pouches - Relatively light weight - Built in cooling mesh - stayed comfortable even on a hotter or more humid day - Easy to put on with front velcro panel - Very adjustable for proper fit - Looks great. While it is multicam, there are a number of coyote accents (shoulder straps) so you can use coyote accessories if pounches you want are not available in multicam (or you already have coyote stuff).
    ConsMinor, but include - Mounting on the back panel around the cumberbund led to some fit issues unless I threaded through Molle on both - There are plate carriers with more molle than this one - The shoulder straps have a limited range of adjustment for keeping the PC higher on your chest - The shoulder straps do not incorporate any attachments or loops for threading a camelbak hydration tube forward. You can rig it up ok, but some have purpose built straps - A bit harder to put on and take off with mags in - harder to fold up the front velcro panel (takes some practice)
    11 Questions & 14 Answers
    from Santa Rosa, CA asked:
    December 24, 2015
    I have IIIA ballistic panels and wondered if they would fit in this vest. The front is a 2014 size and the back is a 1414 size. They are PACA panels.
    1 Answers
    I submitted your inquiry to Tactical Assault Gear and their response was that your armor will not fit in the Rampage Armor Carrier. The largest width that the carrier will accommodate is 11 inches.
    Customer Service
    on January 15, 2016

    from Texas asked:
    August 12, 2015
    I have 10x13 will the fit in the s/m? S/M - Fits Most- Adjustable Cummerbund- Sized For 10x12 Level 3 and 4 Plates L/XL - Fits Most- Adjustable Cummerbund -Sized For 11x14 Level 3 and 4 Plates
    1 Answers
    I inquired through our Representative at TAG about this and this was their response "The inner plate pocket for the hard plates on the Rampage should accommodate a longer plate but not the wider plate." I hope that helps!
    Customer Service
    on August 14, 2015

    from California asked:
    June 16, 2015
    Does this plate carrier have a split front opening flap like your item description OR does it have a single front opening flap like the pictures you have posted for the plate carrier?
    1 Answers
    It has a Single flap on the front covering the split opening. So you would have to first lift the front flap then you can open one or both sides to get into and out of the carrier.
    Customer Service
    on June 16, 2015

    from Tempe, Az asked:
    March 31, 2015
    I would like to know what the actual vest measurement is. not for the plates but for the VEST itself. im interested in buying this but want to be certain that my soft body armor will also fit inside.
    1 Answers
    It's 11.5" wide straight down to 14.5" in length by .75" thickness. I wear AR500 steel plates with .25" backers and still have .25" to.50" to spare. Hope this helps.
    on April 1, 2015
    from Jacksonville, FL

    from Miami asked:
    March 15, 2015
    What are this carriers dimensions? I want to know if my balcs cuts of armor will fit
    1 Answers
    this item is as sized below S/M - Fits Most- Adjustable Cummerbund- Sized For 10x12 Level 3 and 4 Plates L/XL - Fits Most- Adjustable Cummerbund -Sized For 11x14 Level 3 and 4 Plates
    Customer Service
    on March 16, 2015

    from Savannah, GA asked:
    December 11, 2014
    What size of side plates can you put in this, 6x6 or 6x8 or both?
    1 Answers
    It will take both...I currently have 6x8 side plates from AR500.com
    on December 11, 2014
    from Jacksonville, FL

    from cal asked:
    November 5, 2014
    are the buckles on the shoulders on the front or the back? i am concerned that they will hit the butt stock of the rifle
    3 Answers
    This item does not feature buckles but uses velcro to adjust the shoulder straps for height so you would not have any buckles to interfere with shooting a weapon.
    Customer Service
    on November 5, 2014
    No shoulder buckles on this rig it has 2' nylon with hook and loop.
    on November 5, 2014
    from Jacksonville, FL
    There are no buckles - only velcro attachments. That is one of the advantages of this plate carrier. I have found that it does not interfere with the buttstock of a rifle.
    on November 5, 2014
    from Accokeek, MD

    from Savannah, GA asked:
    November 3, 2014
    Does the inside have mesh or any type of system to channel heat away?
    2 Answers
    Yes it has mesh on the inside of the front and back.
    on November 3, 2014
    from Jacksonville, FL
    It has a mesh interior lining that increases breathability and channels some heat away. It does not have cooling channels like some other plate carriers.
    on November 5, 2014
    from Accokeek, MD

    from USA asked:
    April 20, 2014
    Does the front and back accept both soft and hard armor together?
    1 Answers
    yes the front and back both accept soft and hard around.
    Customer Service
    on April 21, 2014

    from Farmington, Mn asked:
    March 25, 2014
    Can this carrier accept side plates?
    1 Answers
    Yes this item can accept side plates.
    Customer Service
    on March 25, 2014

    Kyle Hatch
    February 15, 2013
    Could a 11 1/2 x 14 plate be stuffed into this?
    1 Answers
    A 14" x 11.5" plate will not fit in this plate carrier. Since the carrier gets a little less wide towards the top, the extra half inch will not fit.
    on February 15, 2013

    You May Also Like