EagleTac T25C2 XM-L2 U2 Flashlight
EagleTac T25C2 XM-L2 U2 Flashlight
EagleTac T25C2 XM-L2 U2 Flashlight
EagleTac T25C2 XM-L2 U2 Flashlight

EagleTac T25C2 XM-L2 U2 Flashlight

SKU #: EagleTac-TX25C2
MSRP: $110.99
Design from ground up, the T25C2 is big improvement from its predecessor T20C2. T25C2 boosts output to 1180 LED lumen with its C3300 Extreme3 circuit. T25C2 shares G25C2 remote switch and extended body tube.


High lumen output LED lumen:

  • XM-L2 U4 (Cool White): 13501-1042/614/115/9
  • XM-L2 U2 (Neutral White): 11801-910/536/100/8

  • ANSI FL-12 lumen

  • XM-L2 U4 (Cool White): 12651-978/576/111/9
  • XM-L2 U2 (Neutral White): 9651-746/440/85/7

  • Smart energy management

  • Energy saving feature (on by default) reduces lumen output by 24% after 200 seconds at turbo mode. With this feature turned off, turbo mode output lumen will be reduced by only 8% instead after 200 seconds. If you wish to turn off this feature, we recommend only do so when you are using 18650 batteries or more than two CR123A for better runtime.
  • ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.

  • Beam distance:

  • The T25C2 beam reaches 287 yards / 262 meters at turbo output with the XM-L2 U2 LED.

  • Reflector:

  • T25C2 uses polished aluminum reflector with smooth reflective finish for maximum output and far projecting beam. No donut, dark dot, or artifacts inside the beam.

  • Easy and Trusty operation:

  • Switch on and off: Turn on the light by pressing the tailcap button until it clicks. Slightly press for momentary on/off.

  • Switching between output:

  • Twist the head to select between turbo, high, and medium output levels. You can pre-selected output level before turning on the light. To access the lowest level, switch to medium level (3rd level), then high level (2nd level), and then back to 3rd level within one second for the lowest output.
  • Reviews
    1 Question & 1 Answer
    from Las Vegas, NV asked:
    July 7, 2016
    what are the dimensions?
    1 Answers
    Head Dia. 1.3 inches (33 mm) Body Dia. 1.0 inch (25.4 mm) Length 5.7 inches (146 mm
    Customer Service
    on July 7, 2016

    You May Also Like