DeSantis Gunhide Tuck-This II Holster
DeSantis Gunhide Tuck-This II Holster
DeSantis Gunhide Tuck-This II Holster
DeSantis Gunhide Tuck-This II Holster

DeSantis Gunhide Tuck-This II Holster

SKU #: Desa-M24
MSRP: $37.99
$28.49
Description
Don't see a holster for your firearm listed? Please use our Holster Finder for a list of great options that are compatible with your gun!

DeSantis Gunhide announces its latest addition in Inside the Waistband nylon, the DeSantis Tuck-This II Holster. The DeSantis Tuck-This II Holster is built from heavily padded 1050D Black Ballistic nylon and lined with slick pack cloth. The widely adjustable belt tab can swing from cross draw to FBI-strong side carry. The DeSantis Tuck-This II Holster's tab allows the shirt to be tucked down in between the gun and trousers affording nearly total concealment. DeSantis made the original "Tuck-able" in the early seventies and cataloged it as the "IA" holster. Auto loader versions of the Tuck This II will have a magazine pouch built into the front holster spine. The DeSantis Tuck-This II Holster is currently made for most concealable hand guns in both right and left hand versions. For additional support, check out the DeSantis Tuck-This II Thumb Break Strap, which is also available.

Specifications
  • Tuck-able under shirts
  • Available in Black
  • Accommodates belts up to 1 3/4" wide
  • Reviews
    3.6
    7 Reviews
    5
    43% (3)
    4
    14% (1)
    3
    14% (1)
    2
    14% (1)
    1
    14% (1)
    43% Recommend this product (3 of 7 responses)
    By Samuel
    Charlotte, North Carolina
    November 25, 2016
    good reliable holster
    I've had this holster for about 7 years, and after carrying it on a nearly daily basis I've had very little to complain about concerning it. it has held any gun I've put in it that was in the rough size range of my glock 19. The only reason I didn't give it a 5 star rating is that it doesn't hold its shape very well, making reholstering somewhat difficult.
    Proslightweight, tuckable, good holster for the price.
    Conscollapses too easily.
    By stefano
    afghanistan
    October 15, 2015
    not good holsted, it doesn't remain fix when I put the pistol inside it
    is not a good holster. the model that I received is not the model that there is on web site
    Prosno one
    Consis not good
    By Jim
    NJ
    January 8, 2015
    Ok
    Did not like the way it for. Was not sturdy enough at all even with a double backed gun belt
    By chuck
    atlanta
    December 2, 2014
    A good bargain at this price!
    This model was designed to fit several different small semi-autos. I ordered to fit a Kahr PM9, but it works very well for my Kahr PM40, and my Sig P-938 as well. I carry this holster with one of these pistols in it daily and it conceals well, is easy to put on and take off, and is comfortable. I have holsters that cost me much more than this one that are uncomfortable and troublesome to put on and take off. I have worn it very little with a shirt tucked in between the gun and belt, but it does work and is concealable if you "blouse" your shirt a little bit over the bulk of the gun.
    Prosprice, comfortable, easy to use, works will with multiple handguns of similar size.
    Consnone for me
    By Jim
    Missouri
    May 26, 2014
    Not as pictured
    The belt shown (with the double screws) is NOT the one shipped. I received the older model which allows more play when drawing the weapon. It's also important to understand the holster rests on your trousers as opposed to your belt like most holsters. This is what allows a shirt to be tucked between the weapon and your trousers.
    ProsLight weight and adjustable to get the best tilt on the holster.
    ConsNeed sturdy waisted trousers since that is what actually supports the weight of your weapon. And the single screw model I received is more difficult to secure in place.
    By Andy
    PSL,FL
    March 16, 2013
    Gunhide
    This is a get conceal carry holster. Light and very versital.
    By Kayla
    Texas
    January 8, 2013
    Compact size, great price
    Ordered this for my husband. He has searched and was unable to locate this holster. I found, purchased, and he is very happy with it. Does a great job, comfortable, and not bulky at all.
    Q&A
    27 Questions & 27 Answers
    lashun
    from grosse pointe,mi asked:
    July 10, 2016
    I have the S&W M&P 40 will this holster work with it 4.5
    1 Answers
    DeSantis shows to work with the 4.25" M&P
    Customer Service
    on July 11, 2016

    Jason
    from OH - Ohio asked:
    February 20, 2016
    Will this work for a sig sauer p226 w / rail?
    1 Answers
    Yes, according to Desantis website, the model # you need is M24BJ88Z0 <= We have that model listed for the Beretta 9000S, but it should work for the P226 w/rail as well.
    Customer Service
    on March 10, 2016

    David Patton
    from Ft. Worth, Texas asked:
    December 5, 2015
    Do you have this to fit a Beretta Storm Subcompact .40?
    1 Answers
    Yes, the model you would need for that is M24BJ77Z0 <= We have that listed as the Springfield XD9 on our dropdown, but Desantis has that same model for your weapon as well.
    Customer Service
    on December 9, 2015

    Charles
    from Kentucky asked:
    October 4, 2015
    Will the Beretta Cougar option fit a full size PX4 storm?
    1 Answers
    No, the version that Desantis is showing is Model # M24BJ88Z0 which is listed as the Beretta 9000S on the drop down menu.
    Customer Service
    on October 6, 2015

    Kwilson
    from Alabama asked:
    January 28, 2015
    Do you have one that will fit Springfield XDS 3.3
    1 Answers
    at this time we do not carry this holster for your weapon. we do apologize.
    Customer Service
    on January 29, 2015

    Joel
    from Brooklyn, NY asked:
    September 29, 2014
    With this holster fit the Ruger Sr9C???
    1 Answers
    Yes this holster will fit your weapon. under the drop down menu the SR40C is listed under the weapon options and this would be the same holster for your weapon as they are the same size.
    Customer Service
    on September 30, 2014

    Antonio
    from AZ asked:
    September 10, 2014
    Is this available for the glock 42 (yet)?
    1 Answers
    yes this item can be purchased for the glock 42 now. we do not have the item listed for the glock 42 yet under the weapon options yet but the model number you would need is the m24bjd6z0 and this according to the manufacture will work for the glock 42
    Customer Service
    on September 11, 2014

    Bill
    from Reading, Pa. asked:
    May 14, 2014
    I have seen this holster on other sites, but it doesn't have the double screws to hold the cant in place. I would like your style to fit a s&w m&p 9 with Laserguard. Is that available?
    1 Answers
    we do not show that this holster would fit your weapon with a lasergaurd. we do apologize.
    Customer Service
    on May 15, 2014

    Marty
    from Virginia asked:
    April 21, 2014
    Is there one model Tuck-This ll holster I can use to carry either the Glock 30SF and S&W M&P .45C?
    1 Answers
    we do show that the glock 30 is listed under the weapon options but not the 30SF we do apologize.
    Customer Service
    on April 21, 2014

    bryan orick
    from lexington KY asked:
    February 2, 2014
    i have a sig 938 do they make one for it right handed
    1 Answers
    unfortunately we do not show your weapon listed for this holster so it will not work correctly. we do apologize.
    Customer Service
    on February 3, 2014

    Chris
    from Ralegh, NC asked:
    February 1, 2014
    Which version would be best for my Ruger SR22?
    1 Answers
    unfortunately at this time we do not show your weapon listed under the gun options so this holster will not work with your weapon.
    Customer Service
    on February 3, 2014

    Texas
    from Houston, Texas asked:
    December 17, 2013
    I am interested in the de santis tuck this II model 24 with mag pocket. I am confused as I am right handed but want left hand mount for small of back carry. Can not find model # for lh and ad sats ambidexterous. Does theis mean that the belt clip can mount on either side?
    1 Answers
    at the end of the description it will say either Left hand draw or right hand draw. there are a few that will say ambidextrous which means they can be both left and right hand draw.
    Customer Service
    on December 17, 2013

    Chad
    from Denver asked:
    November 19, 2013
    Do you sell the version that will fit the Sig P290?
    1 Answers
    i do apologize but no we do no show that holster to be available for your weapon.
    Customer Service
    on November 19, 2013

    Fernando
    July 26, 2013
    What style works is recommended for the Taurus PT 740 (same size as the PT 709)?
    1 Answers
    DeSantis' website does not have the PT740 or PT709 listed as fitting in any of their holsters. We do not have either of these guns to test fit in these holsters and we have been unable to find any information regarding the fit. We are sorry for any inconvenience.
    on July 26, 2013

    Daniel
    March 29, 2013
    Will this fit a Ruger SR40c?
    1 Answers
    Yes, you would need Option # M24BJE1Z0 for this holster to fit your Ruger SR40c.
    on March 29, 2013

    Dustin Myers
    February 28, 2013
    Will this holster work on a shield with a ct laser?
    1 Answers
    DeSantis does make this holster for a S&W M&P Shield with a Crimson Trace LG-489. If these are the options you would like, let us know and we will get the part number added to our site for you to order.
    on February 28, 2013

    KC
    February 24, 2013
    which do i order for a S&W XD .45? 4" barrel?
    1 Answers
    Yes, this DeSantis Holster will fit a Springfield XD45 with a 4" barrel. We have added this option to our website and you will be able to purchase it later tonight (around 5 - 6 PM Pacific Standard Time).
    on February 24, 2013

    Ira Goldberg
    February 18, 2013
    Is there a model for a S&W 4006?
    1 Answers
    DeSantis does not make this holster for a S&W 4006.
    on February 18, 2013

    Patrick Meister
    January 22, 2013
    what style if there is one do I choose for a kel tec pf9?
    1 Answers
    We have added the holster option for a Kel Tec PF9 to our option box, please view the option box to select the holster.
    on January 22, 2013

    CORKY NESBITT
    January 21, 2013
    TARUS PRO MILLENIUM 45 CAL
    1 Answers
    DeSantis does not make this holster for a Taurus Pro Millennium.
    on January 21, 2013

    Jay
    January 21, 2013
    Does this holster support the Springfield XD 9mm 4in Service Pistol?
    1 Answers
    Yes, this holster will fit a 4" Springfield XD9. Please go to the bottom of the option box and you will see the holsters that fit the 4" XD's.
    on January 21, 2013

    jim arnold
    January 20, 2013
    does this fit a paraordinance p14 45
    1 Answers
    Yes, this holster will fit the Para Ordnance P14. In the option box, look for part number that will for the PARA P13, P14.
    on January 20, 2013

    Dylan Hale
    January 9, 2013
    Does this fit the Glock 30?
    1 Answers
    Yes, this holster will fit a Glock 30. Choose option M24BJE1Z0 for right handed draw or M24BBE1Z0 for left handed draw. (Option M24BJE1Z0 only shows a S&W M&P Sheild but it will also fit a Glock 30.) M24BJE1Z0 is the 5th option from the bottom of the option box and M24BBE1Z0 11th from the top.
    on January 9, 2013

    bill
    December 30, 2012
    does this holster fit a sig p238 sport and does it have the mag pouch?
    1 Answers
    DeSantis has informed us that they have not had the P238 Sport model to test the fit of the holsters, but if the dimensions are almost the same as the standard P238 or P238 Equinox, it should fit. If you check our site tomorrow, you will be able to purchase the holster for a standard P238.
    on December 30, 2012

    richard
    December 21, 2012
    Does this holster works well with a fullsize s&w m&p 9mm.
    1 Answers
    Yes, this holster will work with a full sizes S&W M&P 9. Choose option M24BJ88Z0. Our website does not show this as fitting a S&W M&P, but we can assure you it will fit.
    on December 21, 2012

    Daniel
    November 12, 2012
    Any recommendations specifically for the M&P Shield, inside the waistband + 1 clip holsters?
    1 Answers
    This holster is available for a S&W M&P Shield. If you would like this holster, we can get the option added for you so you can order it.
    on November 12, 2012

    Kenny
    October 24, 2012
    What style do I sellect for my .40 S&W EAA Witness Compact (w/ polymer frame)?
    1 Answers
    You will need part number M24BALAZ0. It will be the same holster that fits the Sig 220.
    on October 24, 2012

    You May Also Like