Question: I would like one for my compact 1911 with a 3.5 inch barrel do you make those?
Answer: Blackhawk only specifies this holster fitting a 1911 Commander and a 1911 Government. Both of these guns have longer than 3.5" barrels so we are unsure if it will fit a compact 1911.
Question: will it fit a british army issue browning 9mm?
Answer: Blackhawk does not make this holster for and Browning pistols.
Question: will the cqc serpa listed for the S7W m&p 40 fit the M & P compact 40
Answer: The Serpa holster for the M&P 9/40 will also accommodate the compact version. There will be a little bit of empty space at the bottom of the holster, but the Serpa locking system will still engage your weapon as designed.
Question: Which one will fit the Glock 36?
Answer: Blackhawk does not make this Serpa holster for the Glock 36. However, we have seen reports that a Glock 36 will fit in the Glock 19 holster, but we cannot confirm the accuracy of this statement.
Question: Will this fit a .40 cal hi point?
Answer: Blackhawk does not make this holster for a S&W Hi Point.
Question: Is there one for a Ruger SR 40?
Answer: Blackhawk has informed me that they currently do not have any holsters for the SR40 and the holsters for the SR9 will not fit the SR40.
Question: Will this holster fit my Sig SP 2022 9mm with or without a small under mount laser?
Answer: Yes, this holster will fit a Sig Sauer Sig Pro 2022 WITHOUT an under mount laser. Choose option 410508 in the drop down option box.
Question: Does the Glock 21 holster for this style also fit the Glock 21 SF?
Answer: Blackhawk has informed us that there is a 50/50 chance that a Glock 21SF will fit in this holster. The only Serpa holster that was designed for the Glock 21SF id the Level 2 Serpa Duty Holster which can be found here: http://www.lapolicegear.com/blledugele2s.html
The option for a Glock 21SF is 44H026, it is at the bottom of the option box.
Question: i want a serpa for my Ruger SR40 do u have one.
Answer: Blackhawk does not make this holster specifically for a SR40. However, they do make one for the SR9, and on Ruger's website, it shows the SR9 and SR40 have the exact same dimensions, so the SR40 should fit in the SR9 holster. Choose option 410541BK-R.
Question: what serpa holster fits a glock 17 gen 4
Answer: The Blackhawk Serpa Holsters will fit both the Gen 4 and older generations.
Question: Do you make one for a Browning HP, I didn't find one on your web site. Also I'm looking for one with an additional clip holder attached to the holster do you make any of these. I had seen one but can't rember the brand.
Answer: Blackhawk does not make SERPA holsters for a Browning HP. We have never seen a holster like the SERPA that has a mag holder attache to the side either.
Question: this weapon comes with a paddle option as well as the loop option or is it one or the other?
Answer: This Blackhawk Serpa holster comes with both a paddle and a belt loop attachment.
Question: will this work witg the beretta 96a1?
Answer: A Beretta 96A1 will not fit in the Blackhawk Serpa Holster.
Question: have a Springfield XDM 45, is the xd serpa compatible?
Answer: Blackhawk's site does not state whether or not this holster will fit a XDM, but we have seen multiple reviews on this holster that state that it will fit a .45 XDM. We cannot guarantee this statement though.
Question: Will it still work with the Crimson Trace LaserGrips? (on a G19)
Answer: We have seen some people use the CQC Serpa Holster with Crimson Trace Laser Grips, but the people that are using that set up reported having to trim a little bit of the holster to let the laser have enough room.
Question: does this holster fit with the glock 22 and 23 model handgun?
Answer: Yes, this holster will fit a Glock 22 and a Glock 23, however both guns will not fit in one holster. For a Glock 22 you will need model 410500 and for a Glock 23 you will need model 410502.
Question: Is the S&W 5900/4000 for the entire series. I have a S&W TSW4006
Answer: This holster will not fit the entire 5900 and 4000 series, it will only hold the S&W 5900 and S&W 4000.
Question: Will the Walther P99 holster fit the SW 990L?
Answer: Galco has informed us that the holster designed to hold a Walther P99 will also hold the SW 990L.
Question: Will this fit a s&w sigma .40?
Answer: Blackhawk has a holster fit chart and it shows that this holster will fit a Sigma .40. Choose option 410525.
Question: Will this holster fit a Glock21 with a surefire light
Answer: This Blackhawk Holster will not accommodate a weapon light.
Question: Do you have one for a Berreta 84?
Answer: Blackhawk does not make this holster for a Beretta 84.
Question: which one fits an XDM 4.5 in 9 mm, and which one fits a Sig Sauer 1911, 4 inch barrel?
Answer: Blackhawk does not have either of these handguns listed as fitting in their Serpa holsters. However, we have heard people say that the holster designed for a Springfield XD will fit the XDM and a Sig Sauer 1911 will fit in the 1911 holster if you adjust the tension screw. With that said, we cannot guarantee these guns will fit, please do some further research to see if the handguns will fit.
Question: will this fit on a 2" duty belt?
Answer: Yes, this Blackhawk Serpa Holster will fit belts up to 2.25".
Question: I am looking for a blackhawk serpa cqc holster for my glock 35 but i can't find one-do you make and sell one?
Answer: Yes, a Glock 35 will fit in this Blackhawk Serpa Holster. Choose the option for a Glock 17/22/31. The end of a Glock 35 will stick out past the end of the holster a little since the holster only extends as far as a Glock 17/22/31, but since the holster is open at the muzzle the 35 will fit.
Question: i need a level 2 duty holster that can fit a XDM .40.
Answer: Blackhawk does not make a Serpa Holster for a Springfield XDM.
Question: Will a Taurus PT92 work in the Beretta92 holster?
Answer: This Blackhawk Holster will not fit a Taurus PT92.
Question: Do you fit acz75b
Answer: Blackhawk does not make their Serpa Holsters for any CZ models.
Question: which paddle holster will fit a beretta 70s?
Answer: Blackhawk does not make this holster for a Beretta 70s.
Question: which holster will work for a beretta 70s (any make or model holster-hard sided preferred)
Answer: We checked all our major holster brands and none of them make hard sided holsters for a Beretta 70s.
Question: will this work with a s&w m&p 9 compact
Answer: Yes, this Blackhawk Serpa Holster will fit a S&W M&P Compact. Choose the option for the full sized S&W M&P. There will be a little bit of empty space at the muzzle end of the holster, but the locking system will still engage the gun properly and it will not wiggle around in the holster.
Question: I have a Springfield XD-M 9mm 3.8 , will my gun fit in the regular XD holster sub compact?
Answer: We have seen multiple forum posts stating that an XDm will fit in the XD holster but it will have extra room and be able to wiggle in the holster. Those who noted the wiggle said all you need to do is add a strip of velcro or tape to the interior of the holster to remove the wiggle room. With this being said, we cannot guarantee this will work since we have not tried it ourselves.
Question: Do you make a model for the Tarus 24/7 OSS .45?
Answer: Blackhawk does not make their Serpa Holsters for a Taurus 24/7 OSS.
Question: I'm looking for a serpa holster for a ruger p95 will it fit this holster?
Answer: Yes, this Blackhawk Serpa Holster will fit a Ruger P95. Please view the drop down option box and you will find the holster that fits a P95.
Question: Does Blackhawk produce a CQC holster to fit a Kimber Custom .45 caliber 5" ?
Answer: The Serpa Holster for a Colt 1911 Government will fit a Kimber Custom with a 5" barrel.
Question: I was wondering if you have one for a left handed HK P-2000 compact?
Answer: Yes, this Blackhawk Serpa Holster will fit a H&K P2000. Choose the part number that is listed for a H&K USP Compact (410509 BK-L). This holster will also fit a P2000.
Question: Will this fit a Smith & Wesson MP 9mm (4.25 barrel size, Full size gun)?
Answer: Yes, this Blackhawk Serpa Holster will fit a full sized M&P. IF you view the drop down option box you will find the part number that will fit a S&W M&P.
Question: Do you make this one for glock 35
Answer: If you choose the option for a Glock 17/22/31, it will fit a Glock 34 and 35. The tip of the barrel will stick out from the end of the holster about an inch, but the locking mechanism will still work as designed.
Question: Will this holster hold a Taurus 9mm?
Answer: The only 9mm Taurus that this holster will fit is the 24/7. If you have a Taurus 24/7 chambered in 9mm, this holster will fit. Just click the drop down option box and scroll down until you see the part number that will fit a 24/7.
Question: I NEED A HOLSTER FOR A BERETTA 92A1......WILL MY FIREARM FIT THIS ONE IF NOT DO YOU HAVE ONE THAT IT WELL FIT
Answer: This Blackhawk Serpa Holster will not fit a Beretta 92A1. Blackhawk does not make their Serpa Holsters for a Beretta 92A1.
Question: Will this holster work for a S&W 9mm SW9VE?
Answer: Blackhawk does not make their Serpa Holsters for a SW9VE.
Question: will this fit the smith wesson mp 9mm compact
Answer: Yes, the Serpa Holster for the full sized M&P will fit the compact version. There will be about an inch of empty space at the end of the holster but the locking mechanism will work as it was designed to.
Question: can you put a .380 pistol in it?
Answer: Blackhawk does not make this Serpa Holster for any .380 caliber handguns.
Question: will the serpa holster fit a Sig 1911 Tacops (5" W/rail)? Thanks
Answer: Blackhawk has informed us that a Sig Sauer TacOps 1911 will not fit in their Serpa Holsters.
Question: I have a Beretta 92. Will the barrel stick out the end of the holster?
Answer: The barrel of a Beretta 92 will not stick out past the holster. If you look at the pictures on the product page, there are two pictures of Berettas in the Serpa Holsters.
Question: will it fit a S&W M&P .22LR ?
Answer: Yes, the holster for the S&W M&P 9/40 will fit the .22LR M&P.